Descriptions-Induction lamp ballast/Induction lamp driver - LV
Watts | 40W, 80W, 100W, 120W, 150W, 200W, 250W, 300W, 350W, 400W |
Voltage | 85V~265V |
Driver | DNA |
Hz | 50/60 |
Frequency | 250khz |
Start time | < 0.5s |
Power factor | ≧0.98 |
IP | 54 |
Life(Hours) | 100000 |
Warranty | 6 years |
Watts | Ballast size(mm) | For more information, please feel free to email us at: |
40W | 125*72*50 |
pgsha@188.com
|
80W | 175*72*50 |
100W | 175*72*50 |
120W | 195*103*50 |
150W | 195*103*50 |
200W | 195*103*50 |
250W | 195*103*50 |
300W | 214*112*60 |
350W | 214*112*60 |
400W | 270*112*60 |
Applications
Induction lamp ballast/Induction lamp driver - LV
We produce various of induction lamps’ ballasts(drivers), beside our induction bulbs(tubes), they are compatible with induction bulbs(tubes) from other factories, so they are good to repair the problem induction lamps from other factories.
As you know, when an induction lamp blackouts, the problem is usually from the ballast, then our ballast is good to replace the problem ballast and fix the induction lamp from other factories.
This way to change a ballast only, then the induction lamp works again, it saves cost greatly.
Benefits
1. High quality aluminum housing, strong and works from -45 ℃ to +100 ℃
2. World famous electric parts, like Nippon Chemi-Con, Nichicon, ST USA, IR USA
3. Safety is strongly considered to protect both human and light
4. Intelligent start system, adapt to start in various power grid environments
5. Good compatibility with induction bulbs from other factories
6. Original factory, customization is available, like wattage and size
